• [844] 644-3745
  • [888] 569-3745
Linkedin Youtube Facebook Instagram
Request a Quote
Bay Shore Systems Inc Logo

Real Torque

For Tight Access

Built To Go Where Bigger Rigs Cannot

LAD stands for Limited Access Drilling, and that’s exactly what these rigs were built for—getting into places where overhead, access, and working room rule out a conventional drill. Compact carriers, low attachment heights, and unobtrusive frames make them a good fit inside buildings, around residential foundations, beneath power lines, and anywhere space is limited.

The LAD Series puts the drilling capacity where it can actually be used, giving crews the depth, torque, and control to keep working once the rig is in place.

Request A Quote

When Space Is Limited

Every Inch Matters

When access is limited, every part of the rig has to work within the space available. Each LAD is configured around the job’s overhead clearance, access points, carrier requirements, drilling depth and ground conditions. From attachment height and mast configuration to the rotary, winch and kelly bars, we work with you to build a rig that fits the site and still delivers the drilling performance the work demands.

The goal is not size for the sake of size. It is the torque, depth and capacity the work demands.

rotary

Choose from a range of Bay Shore-designed and manufactured gearboxes, with torque capacities from 14,200 to 40,000 ft-lb.

Winch

Match the kelly winch to the drilling depth and kelly configuration, with available single-layer line pull up to 18,000 lbs.

Kelly Bars

Select from round-locking or square friction kelly bars in configurations designed around the required drilling depth, overhead clearance and ground conditions.

Mast

Match the mast and attachment height to the parameters of the job, including configurations ranging from 8 to 11 ft.

Carrier

Configure the LAD around a compact carrier that can reach the work. Bay Shore Systems can build on nearly any major manufacturer’s platform, whether it comes new from the dealer or from your existing fleet.

LAD Series

Drill Rigs

The Right LAD Starts Here

Each LAD model balances compact dimensions with a different level of torque, drilling depth and carrier capacity. Compare the lineup below based on your available access, overhead clearance, required hole size and ground conditions to find the best starting point for your work.

Don’t know where to start?

Talk to an expert

LAD140

excavator

14,200ft-lb
20kN-m

ROTARY TORQUE (MAX)

60ft
18m

HOLE DEPTH (MAX)

48in
1,200mm

HOLE DIAMETER (MAX)

Rig Details

LAD250

excavator

27,000ft-lb
40kN-m

ROTARY TORQUE (MAX)

60ft
18m

HOLE DEPTH (MAX)

54in
1,370mm

HOLE DIAMETER (MAX)

Rig Details

LAD400

excavator

40,000ft-lb
50kN-m

ROTARY TORQUE (MAX)

60ft
18m

HOLE DEPTH (MAX)

78in
2,000mm

HOLE DIAMETER (MAX)

Rig Details

Contractors choose LAD rigs because they stay productive where access constraints shut other rigs down.

MORE WAYS

TO BUILD YOUR LAD

From downhole visibility and powerline detection to added crowd and faster leveling. LAD Series add-ons let you equip the rig around your applications, crews, and jobsites.

Downhole Camera

Real-time visibility into downhole conditions, casing advancement, and hole stability.

People Detection System

AI-assisted camera coverage with configurable safe zones to reduce blind spots around the rig.

Overhead Powerline Detection

Safety system used to detect proximity to energized high-voltage power lines.

Return To Level

Leveling to within 0.5 degrees for faster and more precise rig setup.

Variable Crowd

Allows operators to dial in and maintain the optimal downforce in hard rock, ensuring a steady penetration rate while preventing tool stalling or glazing.

Reaction Jack

Add-on jack that maximizes effective crowd while helping keep the rig plumb.d
Don’t see the capability you need?
Let’s talk about what the job calls for

Smart Controls.

Real-Time Results.

Integrated control systems give operators clear feedback and responsive control to maintain consistent drilling performance. Designed for real jobsite conditions, these controls help reduce operator fatigue while improving accuracy and efficiency throughout the drilling cycle.

Seamless Operation

The EOH system unifies excavator and drill head functions so operators stay focused on drilling.

Touchscreen Adjustments

Tune torque, crowd force, and rotary speed on the fly to match changing ground conditions instantly.

Faster Fixes

Built-in diagnostics cut troubleshooting time from days to hours.

Operator Insight

Track run hours from the cab to support better maintenance planning and operator accountability.

Carrier Ready

Fully compatible with the latest EOH excavators—so you get the rig you want, on the machine you choose.

Industries recommended FOR THE LAD SERIES RIG

learn more

Construction
& Infrastructure

Power
& Transmission

Utility
“We’ve put the LAD140 in the tightest spaces and through the most treacherous terrain…this rig has come out on top every time.”
Mike DuffeyKindness General Contractors, Inc.
“Kindness General Contractors, Inc. has put the LAD140 in the tightest spaces and through the most treacherous terrain possible to meet our customer’s needs. Regardless of the size of the hole, this rig has come out on top every time and proven itself to be the most widely used and profitable rig we own. KGC, Inc. will definitely be adding more of Bay Shore Systems LAD’s to our fleet in the upcoming years."
Mike DuffeyKindness General Contractors, Inc.

Ready to build your LAD rig?

Talk to our experts to see how the LAD Series fits your next job.

Talk to a specialist

Stay connected